3M Tegasorb Hydrocolloid

3M Tegasorb™ by 3M

3M Tegasorb Hydrocolloid ™ by 3M

Remove Tegasorb from package

Remove Tegasorb from package

Peel off half of backing by the #1 tabs

Peel off half of backing by the #1 tabs

Center over wound and remove remainder of backing

Center over wound and remove remainder of backing

Remove transparent #2 covers

Remove transparent #2 covers

Remove the perforated #1 tabs

Remove the perforated #1 tabs

Add current date to outside of dressing

Add current date to outside of dressing

Remove by pulling adhesive edges away from the center

Remove by pulling adhesive edges away from the center
 
  • Ensure skin under adhesive is dry and intact.

  • Dressing should extend 1" beyond the wound edges.

  • Dressing should be changed every seven days or before, if leaking.

  • No Sting Spray may be used on surrounding skin to increase adhesion.

LHSCHealth Professionals


Please Note

The content and images on the Wound Care Site are intended for Health Professionals and may be disturbing to some.
Last Updated February 1, 2009 | © 2007, LHSC, London Ontario Canada